Economy
How Inflation Is Measured, and Why Your Own Bills Might Feel Different
A plain-English look at the Consumer Price Index, the basket of goods behind it, and why the official number may not match your grocery receipt.
Published
11 months agoon
Inflation is one of those words that comes up constantly, at kitchen tables and in business meetings alike. Most of the time, the number people are talking about comes from the Consumer Price Index. Understanding how it is built helps explain both what it tells you and what it leaves out.
The Basket Idea
The U.S. Bureau of Labor Statistics, part of the Department of Labor, publishes the Consumer Price Index every month. The concept is simple: imagine a big shopping basket filled with the goods and services households typically buy, then track how much it costs to fill that same basket over time.
Advertisement
The basket covers far more than groceries. It includes rent and the estimated cost of owning a home, electricity and heating fuel, gasoline, clothing, medical care, car insurance, airline fares, restaurant meals, tuition and much more. Data collectors gather prices from stores, landlords, service providers and websites across the country.
Weights Matter
Not every item counts equally. Spending surveys tell statisticians how households divide their budgets, and each category is weighted accordingly. Housing is the largest piece, so a change in rents moves the index far more than a change in the price of coffee.
The headline figure most reporters cite is the CPI for All Urban Consumers. BLS also publishes indexes for specific regions and metro areas, including one for the Boston-Cambridge-Newton area, which can differ from the national figure because local costs, especially housing and energy, behave differently.
Headline Versus Core
You will often hear about core inflation. This version strips out food and energy, not because they are unimportant, but because their prices swing sharply with weather, global events and seasons. Core inflation is meant to show the underlying trend more clearly.
The Federal Reserve, for its part, pays especially close attention to a different measure called the Personal Consumption Expenditures price index, produced by the Bureau of Economic Analysis. It is built differently and tends to run a bit lower than the CPI, but the two usually move in the same direction.
Why It May Not Match Your Life
The CPI describes an average household, and nobody is exactly average. Your personal inflation rate depends on what you actually buy:
- Renters who just signed a new lease may feel housing costs far more than longtime homeowners with a fixed mortgage.
- People who drive long commutes feel gasoline swings more sharply.
- Households heating with oil in a cold New England winter face different costs than those in mild climates.
- Frequently bought items, like groceries, shape our impressions more than big purchases we make once a decade.
Statisticians also adjust for quality changes and for the way people switch products when prices rise. These adjustments are debated, but they exist because a new laptop is not the same product as one from five years ago.
Reading the Number Wisely
When you see a monthly inflation report, look at the year-over-year change, check whether the core figure is telling the same story, and remember that regional numbers may be more relevant to you. For decisions about your own savings, debt or business pricing, it is worth talking with a qualified financial professional who can look at your specific situation.
Advertisement
Background
The CPI is expressed as an index number rather than a dollar amount. Prices in a reference period are set to equal 100, and later prices are compared with that base. For the main CPI, the reference period is 1982 to 1984. An index of 300, for example, would mean prices are roughly three times their average level in that base period. Most news coverage focuses on percentage changes in the index rather than the index level itself.
BLS publishes several versions of the CPI for different purposes. Besides the CPI for All Urban Consumers, there is a CPI for Urban Wage Earners and Clerical Workers, which is used to calculate annual cost-of-living adjustments for Social Security benefits. There is also a chained CPI, which accounts more fully for the way consumers shift purchases when relative prices change.
Housing costs for homeowners are measured in an unusual way. Rather than tracking home prices, which are partly investments, the CPI estimates owners’ equivalent rent, an estimate of what homeowners would pay to rent their own homes. Because this component is large and changes slowly, it can keep the overall index elevated or subdued for long periods.
What it means for Boston-area readers
For households and businesses in Greater Boston, a few general practices help make inflation data more useful:
- Track your own costs. Reviewing a year of bank or card statements by category shows your personal inflation more accurately than any average.
- Watch the regional index. The Boston-Cambridge-Newton CPI reflects local conditions, especially housing and energy, more closely than the national figure.
- Consider timing. Monthly changes can be noisy. Year-over-year comparisons and multi-month trends are generally more informative.
- For businesses: Compare your input costs with the CPI categories that match them, such as food, energy or shelter, when reviewing prices.
- For wage discussions: Comparing raises with inflation shows whether pay is keeping up in real terms.
Key terms
- Index number: A value showing change relative to a base period set at 100.
- Core inflation: Inflation excluding food and energy.
- Owners’ equivalent rent: An estimate of what homeowners would pay to rent their own homes, used in the CPI.
- Chained CPI: A version of the CPI that adjusts more fully for consumers switching products.
- PCE price index: A measure of prices for personal consumption produced by the Bureau of Economic Analysis.
- Real wages: Wages adjusted for inflation.
What to watch
- Monthly national CPI releases and the core figure.
- Releases of the Boston-Cambridge-Newton index.
- The PCE price index, which the Federal Reserve follows closely.
- Shelter costs, which make up a large share of the index.
- Your own household or business costs compared with the published figures.
Quick check: Which item carries the largest weight in the Consumer Price Index?
- Coffee
- Housing
- Airline fares
Show answer
B. Housing is the largest piece of the CPI basket, so changes in rents move the index far more than smaller items.
Boston Made family
Boston Made Pets
Pet apparel and gear inspired by Boston the GoldenDoodle. Visit site →
Advertisement
Latest stories
View allYou may like
-
What Actually Happens When You Ask an AI Chatbot a Question
-
Boston Fed’s Susan Collins Warns Rates May Need to Rise if Inflation Doesn’t Ease
-
What Rising Costs Mean for Boston’s Small Businesses in 2026
-
Reading a Small Business Loan Offer: The Terms That Matter Most
-
What the Unemployment Rate Does and Does Not Tell You
-
How Municipal Bonds Work: The Quiet Financing Behind Schools, Bridges and Water Pipes
Small Business & Entrepreneurship
The One-Page Continuity Plan: Who Does What When Your Systems Go Down
A one-page continuity plan: roles and backups, vendor contacts, first steps for site, email, payment or data failures, message templates and a review date.
Published
4 days agoon
November 14, 2026
The first seven parts of this series built the pieces; the last one fits them on a single page that tells anyone in the business who does what, who to call and what to say when the website, email, payments or data stop working.
Eight Nights · Part 8 of 8 · See the full series
Advertisement
Why one page is enough to start
Ready.gov’s business continuity plan template is thorough, covering the continuity team, a business impact analysis, recovery strategies, manual workarounds, incident management, training, testing and maintenance, and Ready.gov advises building an IT disaster recovery plan alongside it. That is the destination. A business with a handful of employees can start with a single page that someone can follow on a bad morning.
The Small Business Administration’s Business Resilience Guide points at the same core: document the operations that matter and the systems behind them, build relationships with key vendors, protect data with backups and cybersecurity, and plan for cash flow. The page below has five blocks (costs, roles, contacts, first steps and messages) plus a review date.
Start with what an outage costs
Ready.gov describes a business impact analysis as a way to predict the consequences of a disruption. The impacts it lists include lost sales and income, increased expenses such as overtime and outsourcing, regulatory fines, contractual penalties and customers who leave. Timing matters too: Ready.gov notes that when a disruption happens can significantly affect the loss, and it advises restoring the processes with the greatest operational and financial impact first.
Two terms from the Ready.gov template are worth putting in plain words. A recovery time objective is how long a process or system can be down before the damage becomes unacceptable. A recovery point objective is how much recent data the business can afford to lose, which is set by how often backups run (Part 2 of this series). Writing both down for the website, email, payments and accounting tells everyone what “urgent” means.
The calculator below uses the business’s own figures rather than industry averages: typical revenue per hour times hours down, plus one-time recovery costs such as emergency developer time or overtime.
Roles, and a backup for every role
Ready.gov’s template asks businesses to define team members’ roles and responsibilities, lines of authority and who takes over when a leader is unavailable. On one page, that becomes four lines, each with a named person and a named backup:
- Incident lead: decides what happens next and approves customer messages.
- Website and email: contacts the host, registrar or web developer and starts restores.
- Money: runs the backup payment method from Part 3 and talks to the bank and processor.
- Customers and staff: posts updates to listings and social media (Part 5) and answers the phone.
The SBA’s emergency tips say staff need to know whom to contact and how, and suggest setting up a phone tree in advance. Personal mobile numbers belong on the page, because company phones and email may be what failed.
The contact sheet
Ready.gov’s template includes a vendor table with company, contact name and both emergency and business phone numbers. For an online operation, list the registrar, web host, web developer, email provider, payment processor, bank, IT support and insurance agent. Next to each, note where the login and any support PIN live: the company password manager from Part 1, never the page itself.
Ready.gov’s crisis communications guidance says contact lists should be compiled in advance, accessible during an incident, updated regularly and secured. Keep a printed copy in the office and a copy stored outside the company’s own systems. A plan saved only in the email account is no help when email is down.
First steps for the four common failures
Website down
Check from a phone on cellular data to rule out the office connection. Confirm the domain has not expired (Part 1), then call the host with the account PIN ready. Post a notice on the Google Business Profile and social accounts. If the site was hacked or corrupted, restore from a tested backup (Part 2).
Email down
Switch staff to the phone tree or a group text. Check that the domain renewed and its email settings match the DNS records from Part 1, then contact the provider. If an account may have been taken over, the FTC’s first steps are to change the compromised passwords and disconnect affected devices from the network (Part 6).
Payments down
Move to the backup method from Part 3, such as payment links or invoices, and tell customers at the counter and online what still works. Follow Part 3’s card-handling rules rather than improvising.
Data loss or breach
The FTC’s Data Breach Response guide says to mobilize the response team, take affected equipment offline without turning machines off until forensic experts arrive, and preserve evidence. It also says to check state and federal laws and notify law enforcement, affected businesses and affected individuals as required. If money was sent because of a fraudulent request, the FBI’s Internet Crime Complaint Center advises contacting the bank immediately to ask for a recall and filing a complaint at ic3.gov.
Advertisement
Messages written before they are needed
Ready.gov’s crisis communications guidance names the audiences that will want information: employees, customers, suppliers, management, and government officials or regulators. It recommends pre-scripting messages “as templates with blanks to be filled in” when details are known. Two templates cover most small business outages:
Customers: “We’re having a problem with [our website / card payments / email] as of [time]. You can still [call us at ___ / pay by ___ / visit us at ___]. We’ll post an update by [time] at [where].”
Staff: “[System] is down as of [time]. [Name] is leading the response. Until further notice, [workaround]. Send questions to [name] at [personal phone], not by company email.”
Review it on a schedule
Ready.gov’s template calls for a schedule, triggers and assignments for periodic review, plus training, orientations, tabletop drills and full-scale exercises. For a small business, a workable rhythm is a quarterly review, an immediate update whenever a person, vendor or account changes, and an annual tabletop run: the site goes down at 10 a.m. on a busy Saturday, and the team talks through each step. The template also recommends one master copy kept by the team leader.
The Fenway Web Take
A continuity plan fails in two predictable ways: it cannot be found when the systems it describes are down, or the names on it have changed. Fenway Web’s view is that the page should be printed, dated, signed by the incident lead and reviewed every quarter. Each part of this series feeds one line of it. Fenway Web offers clients a free continuity review.
Tonight’s checklist
- Name an incident lead and a backup.
- List every vendor with a support phone number and where its login and PIN are stored.
- Write the first three steps for site down, email down, payments down and data loss.
- Draft one customer message and one staff message with blanks.
- Run the downtime calculator with real numbers.
- Print the page and store a copy outside company systems.
- Put a quarterly review on the calendar.
What it means for you
- A one-page plan that people can find beats a thorough plan nobody can open during an outage.
- Every role needs a named backup and a phone number that does not depend on company systems.
- Prepared messages save the most time when customers are asking questions.
- Using real revenue figures shows which systems deserve investment first.
Test yourself
1. What is a recovery point objective, in plain words?
Answer: How much recent data the business can afford to lose, which depends on how often backups run.
2. After a suspected data breach, should affected computers be switched off?
Answer: No; the FTC says to take affected equipment offline but not to turn machines off until forensic experts arrive.
3. Which business processes does Ready.gov say should be restored first?
Answer: Those with the greatest operational and financial impact.
4. Why keep a printed copy of the plan?
Answer: A plan stored only in email or on the website is out of reach when those systems fail.
Discussion
- If the owner were unreachable for a day, who would lead the response, and do they know it?
- Which system would cost the most per hour if it failed: the website, email, payments or accounting?
- What is the one message customers most need to hear in the first hour of an outage?
Downtime cost calculator
Enter the business’s own figures to estimate what one outage could cost. Add overtime, rush fees or outside help to the recovery cost. Blank fields count as zero.
Estimated cost of this outage: $0.00
From the network
- Boston Made Reader — every story from the family in one free reading app.
- Fenway Web — the web design and care studio of Boston Made, Inc.
- Boston Made — the company behind the Boston Made family.
Sources
- Ready.gov — Business continuity plan template (PDF)
- Ready.gov — Response and recovery plans
- Ready.gov — Business impact analysis
- Ready.gov — Business impact analysis: operational and financial impacts
- Ready.gov — Crisis communications plans
- U.S. Small Business Administration — SBA launches new Business Resilience Guide (Aug. 1, 2024)
- U.S. Small Business Administration — Business Resilience Guide: Reducing Risks and Building on Strengths
- iQuasar — Key takeaways from SBA’s Business Resilience Guide
- U.S. Small Business Administration — Disaster/emergency tips for small businesses
- Federal Trade Commission — Data Breach Response: A Guide for Business (PDF)
- Federal Trade Commission — Phishing fact sheet for small business (PDF)
- FBI Internet Crime Complaint Center — Business email compromise
Small Business & Entrepreneurship
Work on a Weak Signal: Making a Small Business Site Fast on Any Phone
Core Web Vitals targets, lighter images, careful lazy-loading, fewer third-party scripts and how to test a site the way a phone on a weak signal sees it.
Published
5 days agoon
November 13, 2026
The real test of a business website is a customer in a parking lot with one bar of signal, and passing it is mostly a matter of sending that phone less: smaller images, fewer scripts and a page that shows its most important content first.
Eight Nights · Part 7 of 8 · See the full series
Advertisement
Google reads the phone version first
Google says it uses “the mobile version of a site’s content,” crawled with its smartphone agent, for indexing and ranking. Its mobile-first guidance follows from that: the mobile site should carry the same content as the desktop site, the same structured data, equivalent page titles and descriptions, and the same robots tags. Google also says not to lazy-load primary content upon user interaction, such as a tap or click.
In practice, anything a mobile theme hides, such as hours tucked behind a menu that loads on tap or a services list dropped to save space, risks being missed. As far as search is concerned, the phone view is the site.
Three numbers that describe speed
Google’s Core Web Vitals turn “fast” into three measurements, and web.dev publishes the thresholds.
- Largest Contentful Paint (LCP) measures how long the main image or block of text takes to appear. Good is 2.5 seconds or less; poor is more than 4 seconds.
- Interaction to Next Paint (INP) measures how quickly the page responds to taps and clicks. Good is 200 milliseconds or less; poor is more than 500.
- Cumulative Layout Shift (CLS) measures how much the page jumps around while loading. Good is 0.1 or less; poor is above 0.25.
The scores are judged at the 75th percentile of page views, meaning a page rates good only if at least three out of four visits meet the target. The same thresholds apply on phones and desktops. Google Search Central says it highly recommends good Core Web Vitals and that they align with what its core ranking systems reward. It is equally clear about the limit: Google says Search “always seeks to show the most relevant content, even if the page experience is sub-par.” Speed helps most when several useful pages compete for the same search.
Test like a customer, not like the office
An office laptop on a fast connection is a poor place to judge a website. Three free tools give a truer picture.
- PageSpeed Insights shows two kinds of results. Field data comes from the Chrome User Experience Report, built from real Chrome visits, and reflects what customers actually experience. Lab data comes from Lighthouse, which loads the page on a simulated mid-range phone over a throttled mobile connection and is best for finding what to fix. Pages with too little traffic fall back to data for the whole site.
- Search Console’s Core Web Vitals report groups similar pages, splits results by mobile and desktop, and labels each group good, needs improvement or poor. A group takes the status of its worst metric.
- Chrome DevTools device mode includes “Mid-tier mobile” and “Low-end mobile” presets that slow both the network and the processor. Google’s documentation calls device mode a first-order approximation and recommends a real device for accurate results.
The most honest test is still the cheapest: an ordinary phone, Wi-Fi off, standing at the far end of the building.
Start with the images
Chrome’s Lighthouse documentation says large downloads are highly correlated with long load times and can cost visitors money on cellular data plans. Images are the easiest place for most owners to start cutting that weight, with three fixes.
Pick the right format. web.dev recommends JPEG, lossy WebP or AVIF for photos, and says WebP and AVIF generally compress better than older formats and should be used where possible; both work in all modern browsers. PNG preserves fine detail at the cost of much larger files, and vector graphics suit logos and icons.
Send the right size. A photo sized for a wide desktop monitor is wasted on a phone. The srcset and sizes attributes let the browser choose a smaller file for a smaller screen, and Lighthouse flags images that are larger than the space they fill. For WordPress, Chrome’s documentation advises uploading through the media library so the smaller sizes are generated, and avoiding “Full Size” images unless the dimensions are actually needed.
Reserve the space. web.dev recommends width and height attributes on every image so the layout does not jump as pictures arrive, which protects the CLS score.
Lazy-loading, done carefully
Adding loading="lazy" to an image tells the browser to wait until the visitor scrolls near it. web.dev advises using it only for images outside the first screen. The large photo at the top of a page can be the element that sets LCP, and lazy-loading it delays exactly the moment being measured. Browsers that do not support the attribute simply ignore it.
WordPress core adds loading="lazy" automatically to images that carry width and height attributes, including those in post content and excerpts. That default is helpful further down a page, but it is worth checking that a theme or plugin has not applied lazy-loading to the hero image as well.
Advertisement
Fewer third-party scripts
Third-party scripts are code loaded from someone else’s server: social sharing buttons, video embeds, advertising frames, analytics and testing tools. web.dev notes they can add requests to several outside servers and keep the phone’s processor busy, delaying both the first view and the response to taps. Its advice is direct: if a script does not add clear value, remove it. For the rest, load scripts with async or defer unless they are essential to the first render, and delay embeds such as videos until the visitor scrolls near them.
A useful exercise is a one-page script inventory: every tracking pixel, chat bubble, pop-up and widget on the site, who asked for it and when anyone last looked at its results. Scripts with no owner are candidates for removal.
The Fenway Web Take
Speed is usually filed under marketing, but it behaves like continuity. A page that loads on office Wi-Fi and stalls on one bar of signal is effectively down for the customer who is trying to find the address, call or pay. Fenway Web’s recommended order of work is simple: measure the mobile scores first, fix images, cut scripts, confirm the top image is not lazy-loaded, then measure again so the change is visible. Most of that work removes things rather than adds them. Fenway Web offers clients a free continuity review.
Tonight’s checklist
- Run the home page and the busiest landing page through PageSpeed Insights on the mobile tab.
- Write down LCP, INP and CLS, and whether each is rated good.
- Load the site on a phone with Wi-Fi off, away from the router.
- Replace oversized photos with properly sized WebP or AVIF versions.
- Confirm the main image at the top of each key page is not lazy-loaded.
- List every third-party script and remove those nobody can justify.
- Compare the mobile and desktop pages to make sure no important content is missing on the phone.
What it means for you
- Google ranks the mobile version of the site, so that is the version to perfect.
- Aim for LCP of 2.5 seconds or less, INP of 200 milliseconds or less and CLS of 0.1 or less.
- Smaller, modern-format images are one of the simplest improvements to make.
- Every widget and tracking script has a speed cost and should earn its place.
Test yourself
1. What Largest Contentful Paint time counts as good?
Answer: 2.5 seconds or less, measured at the 75th percentile of page views.
2. Should the large photo at the top of the home page be lazy-loaded?
Answer: No; web.dev advises lazy-loading only images outside the first screen, and the top image can be the element that sets LCP.
3. Which version of a website does Google use for indexing and ranking?
Answer: The mobile version, crawled with Google’s smartphone agent.
4. In PageSpeed Insights, what is the difference between field data and lab data?
Answer: Field data reflects real Chrome visits, while lab data comes from a simulated test on a throttled phone and is best for debugging.
Discussion
- Where do customers most often pull up the website, and how strong is the signal there?
- Which script or widget on the site would anyone actually miss if it disappeared tomorrow?
- Who should own the mobile speed scores, and how often should they be checked?
Weak-signal download time
Take the page weight from PageSpeed Insights or Chrome DevTools and see how long it takes to download on a slow connection, before and after trimming images.
Time to download the page:
From the network
- Boston Made Reader — every story from the family in one free reading app.
- Fenway Web — the web design and care studio of Boston Made, Inc.
- Boston Made App — a guided way to discover every brand and tool in the family.
Sources
- Google Search Central — Mobile site and mobile-first indexing best practices
- web.dev — How the Core Web Vitals metrics thresholds were defined
- Google for Developers — About PageSpeed Insights
- Google Search Central — Understanding Core Web Vitals and Google search results
- Google Search Central — Understanding page experience in Google Search results
- Search Console Help — Core Web Vitals report
- Chrome for Developers — Simulate mobile devices with device mode
- Chrome for Developers — Lighthouse: Avoid enormous network payloads
- Chrome for Developers — Lighthouse: Properly size images
- web.dev — Choose the right image format
- web.dev — Serve responsive images
- web.dev — Browser-level image lazy loading for the web
- Make WordPress Core — Lazy-loading images in 5.5
- web.dev — Load third-party JavaScript
Economy
Fed Holds Rates in Split 10–2 Vote as Two Officials Push for a Hike; Stocks Edge Higher
The Fed held its target range at 3.75% to 4%, but Lisa Cook and Beth Hammack dissented in favor of a hike. Stocks closed modestly higher while the 10-year yield climbed to about 5.05%.
Published
3 weeks agoon
October 28, 2026
The Federal Reserve left interest rates unchanged on Wednesday, but the vote showed a central bank leaning toward tighter policy. Policymakers held the federal funds target range at 3.75% to 4% in a 10–2 decision. Governor Lisa Cook and Cleveland Fed President Beth Hammack both dissented in favor of a quarter-point increase.
It was the first time since 1992 that a Fed governor and a regional bank president dissented together on the same side, and Cook’s first dissent since she joined the Board in 2022. The pause comes one month after the Fed raised rates for the first time in three years, and less than a week before the midterm elections.
Advertisement
What the statement said
The Committee described economic activity as growing briskly, with strong productivity and capital investment. Job gains have kept pace with growth in the workforce, and the unemployment rate has changed little. On prices, the language was blunt: “Inflation remains elevated.” The statement said the Fed wants a “timely” return to its 2% goal and added a line that stood out: “The Committee will deliver price stability.”
That framing matters because inflation has moved the wrong way this year. Consumer prices rose 3.7% in September from a year earlier, up from 2.4% in February, as the conflict with Iran pushed up oil and gasoline costs. Unemployment sits at 4.2%.
Warsh: the medicine is “starting to work some”
At his press conference, Chair Kevin Warsh described the decision as a chance to “take stock” after September’s hike. He said the overwhelming consensus on the Committee was that the Fed’s “monetary medicine is starting to work some,” while stressing that officials had reached no firm conclusions. He did not commit to a move in December.
Markets did not take that as a dovish turn. Traders kept roughly an 85% chance of a quarter-point hike at the December 9 meeting priced in, and several strategists called a December increase close to a foregone conclusion. Economists at Indeed Hiring Lab said the joint dissent signals how uneasy part of the Committee is about rising inflation expectations.
How markets closed
- S&P 500: 7,743.98, up 21.38 points (+0.28%)
- Dow Jones Industrial Average: 52,475.10, up 97.53 points (+0.19%)
- Nasdaq Composite: 26,549.85, up 72.04 points (+0.27%)
- 10-year Treasury yield: about 5.05%, up roughly 5 basis points. The 2-year rose about 4 basis points to 4.78%.
- Gold: futures finished near $4,075 an ounce, roughly flat, after spot gold slipped toward $4,030 earlier in the day as higher oil prices revived inflation worries.
Stocks spent most of the session in a narrow range and held small gains after the decision. Oracle jumped about 11% on a bullish long-range revenue outlook, and chipmakers firmed after SK Hynix reported a sharp jump in profit. After the bell, Microsoft rose on better-than-expected results while Alphabet fell on a revenue and earnings miss, setting up a mixed open for big tech on Thursday.
What to watch next
Thursday’s PCE inflation report, the Fed’s preferred price gauge, is the next test. September PCE is forecast to have risen 3.6% from a year earlier, with the core measure at 3.1%. A hot reading would reinforce expectations for a December hike. A 10-year yield holding above 5% also keeps pressure on mortgage rates, which reached a three-year high of 7.4% earlier this month.
This article is for general information only and is not investment, financial or tax advice. Markets move quickly, and past performance does not guarantee future results. Consult a licensed professional before making investment decisions.
Sources
- Federal Reserve — FOMC statement, October 28, 2026
- Fortune — Fed holds rates as a governor and president dissent together
- Yahoo Finance — Stock market today, October 28
- Yahoo Finance — FOMC holds rates steady, markets mostly follow suit
- Associated Press — Fed expected to hold despite elevated inflation
- IndexBox — Gold eases as oil lifts inflation concerns
Understanding the Decision
Fed meetings come with their own vocabulary. Here is what the key terms in this story mean and why they matter beyond Wall Street.
The federal funds rate
The federal funds rate is the interest rate banks charge one another for overnight loans. The Fed does not set every rate in the economy, but by moving this target range it influences what banks pay to borrow, which then flows into credit cards, business loans, auto loans and savings accounts. Holding the range steady means those borrowing costs are unlikely to change much in the near term because of Fed action alone.
Why dissents get attention
The Federal Open Market Committee votes on each decision. Its voting members are the seven Board governors, the president of the New York Fed and four other regional bank presidents who rotate through voting seats. Most decisions are unanimous or close to it, so two dissents in favor of a hike signal that a meaningful part of the Committee believes inflation needs a firmer response than the majority chose.
Advertisement
Basis points
A basis point is one hundredth of a percentage point. A quarter-point move in rates equals 25 basis points, and a yield that rises 5 basis points has moved by 0.05 percentage points.
PCE, CPI and Why the Fed Has a Favorite
The consumer price index and the personal consumption expenditures price index both track how prices are changing, but they are built differently. CPI focuses on what urban households pay out of pocket. PCE covers a broader range of spending, including costs paid on consumers’ behalf, such as employer-provided health insurance, and it adjusts more readily as people shift what they buy when prices change. That is why PCE readings often come in a little lower than CPI.
The “core” version of each measure excludes food and energy, which tend to swing sharply from month to month. When oil and gasoline are driving prices higher, as they have been this year, watching core inflation helps show whether price pressure is spreading into the rest of the economy or staying concentrated in energy.
What This Means for Households and Businesses
- Mortgages: Thirty-year fixed mortgage rates tend to follow the 10-year Treasury yield rather than the federal funds rate directly. A 10-year yield holding near 5% helps explain why home loans remain expensive even in a month when the Fed did not move.
- Variable-rate debt: Credit cards and many business lines of credit are tied more closely to short-term rates, so a December hike would likely show up there first.
- Savings: Higher short-term rates generally support yields on savings accounts and short-term instruments, though banks set their own rates.
- Planning: Businesses that borrow to fund inventory or expansion may want to account for the possibility of higher rates in their budgets.
None of this is a recommendation to buy, sell or refinance anything. Everyone’s circumstances differ, so check with a licensed financial professional before acting.
Questions Readers Ask
What does it mean when markets “price in” a hike?
Traders use futures contracts tied to the federal funds rate to bet on future decisions. The prices of those contracts can be translated into implied probabilities, which is where figures like an 85% chance come from. They reflect market expectations, not a commitment from the Fed.
Why would yields rise on a day the Fed held rates?
Longer-term yields reflect expectations about future inflation and future policy, not just today’s decision. Firm language about inflation can push those expectations higher even without a rate change.
When is the next decision?
The next scheduled decision comes at the December 9 meeting.
BOSSTOX Advances Financial Innovation
Boston Made publishes its 2026 ecosystem audit and editorial review
Fenway Web Drives Digital Growth
Making a Music Video as an Independent Artist: Concept, Budget and Shoot Day
Building Something Bigger: The Future of Boston Made Pets Is Under Construction
Boston Made Expands Creative Content with New “Bands” Music Video Series
Advertisement
Advertisement
Trending
-
Videos3 days agoBoston Made Expands Creative Content with New “Bands” Music Video Series
-
Education2 days agoKeep Up With Nate Launches on Boston Made Newsroom
-
Financial Technology1 hour agoBOSSTOX Advances Financial Innovation
-
Service4 weeks agoFive Signals Your Website Needs an Operating System, Not Another Redesign
-
Web Development1 day agoFenway Web Drives Digital Growth
-
Boston Made Eats4 weeks agoHow TGI Fridays Shrank From 13 Massachusetts Restaurants to Three
-
Technology3 weeks agoFlying Cars Are Getting Real: Where Air Taxis Stand in October 2026, and the Math That Lifts Them
-
Editorial4 weeks agoGOP Ticket Loses Running Mate as House Kills Gas Tax Holiday Before Nov. 3



